News & Events
Tuesday, September 3, 2024
User’s Group is Next Week!
The 13th Annual CiSCO CEMS User’s Group Meeting starts next week! But don’t worry, we still have plenty of room. Register to reserve your spot today by emailing usersgroupmeeting@ciscocems.com.
RSVP for the User’s Group Meeting
Wednesday, July 31, 2024
User’s Group Meeting Reception
Let’s start CiSCO CEMS 13th User’s Group Meeting off right! Instead of our usual happy hour, we’re taking our customers off site to Pindustry! Join us for a night of fun, mingling, drinks, food, and games. We can’t wait to see you there!
Wednesday, July 24, 2024
User’s Group Meeting Week Training Schedule
Get your technicians the hardware training they need in the CiSCO training CEMS. Learn the intricacies of the new Thermo iQ series in our fully equipped analyzer shop. Familiarize your staff with the CeDAR DAHS and breez75x reporting software. Yes, the User’s Group Meeting Training Week is back! To ensure the quality of training, analyzer and hardware classes are limited. Check out this year’s class offerings and email orders@ciscocems.com to get a quote today!
Wednesday, July 17, 2024
13th Annual User’s Group Meeting Agenda
We have finalized our lineup for this year’s conference! Take a look at the topics that will be discussed by our employees and preferred vendors. If you would like to register to attend the event, please contact us at usersgroupmeeting@ciscocems.com.
Thursday, June 27, 2024
User’s Group Suggestions
CiSCO has been busy preparing for this year’s User’s Group Meeting! We have an inviting venue, several guest vendors, and an amazing reception planned. All we have left are the presentations! Let us know what you would learn about at this year’s conference by leaving a comment below or emailing usersgroupmeeting@ciscocems.com.
Thursday, June 20, 2024
User’s Group Meeting Announcement
CiSCO CEMS is excited to invite you to the 13th Annual User’s Group Meeting! Join us Tuesday September 10th and Wednesday September 11th for a deep dive into the world of CEMS hardware, regulations, and software. Hosted at the fabulous Sheraton Hotel Denver Tech Center located at 7007 S Clinton Street in Greenwood Village Colorado from 8:00 AM to 5:00 PM daily, you won’t want to miss this year’s event! Additional training will be available throughout the week. Secure your spot now by emailing usersgroupmeeting@ciscocems.com to register for the conference or for more information on our trainings. We hope to see you then!
Thursday, April 11, 2024
Presenting at EPRI
We are excited to host a booth again at this year’s EPRI CEMUG conference! We are always thrilled at the chance to mingle with customers and see what competitors and vendors have to offer. It is opportunities like this that allow us to stay at the forefront of our industry and provide our customers with the latest advancements in CEMS technology and provide guidance for the ever-changing regulatory statutes. We can’t wait to see you there!
Tuesday, September 5, 2023
User’s Group Meeting is Next Week!
We are so excited for CiSCO’s 12th Annual User’s Group Meeting next week! We look forward to seeing loyal customers, meeting new clients, and engaging in stimulating conversation. If you won’t be able to attend in-person this year, don’t worry! All slides and presentations will be uploaded to our website and YouTube channel.
Tuesday, August 29, 2023
Sponsored Coffee & Snack Breaks
Monday, August 21, 2023
Analyzer Training
New analyzer technician? Unsure of the new developments in analyzer software? Just need a refresher on the fundamentals? Take an analyzer training course! We are conducting our classes the week of September 11th that will cover a wide variety of analyzer topics. Be sure to email us today at info@ciscocems.com or visit our website at https://ciscocems.com/cisco-training-services/ for more information.
Monday, August 14, 2023
User’s Group Meeting
Our annual week of software training is coming up! Every year we offer software training during the week of our User’s Group Meeting. Instead of a course for employees of a single plant, participants get the added benefit of collaboration and questions from colleagues from other sites plus the opportunity to enjoy our two-day conference!
Monday, August 7, 2023
Reception Flyer
We’re changing things up again! Instead of our usual cocktail reception, we will be hosting this year’s Annual User’s Group reception at Top Golf! All participants are welcome to enjoy a fun night out of drinks, eats, and mingling at the range to kick off the conference. Secure your spot now and RSVP when you register for the conference by emailing jrawley@ciscocems.com.
Thursday, August 3, 2023
User’s Group Agenda
We have finalized the schedule for this year’s User’s Group Meeting! We appreciate all the suggestions and are excited for our employees and vendors to present these topics. Take a look! As always, if you have a suggestion for next year, leave a comment or email us at usersgroupmeeting@ciscocems.com.
Tuesday, June 20, 2023
Software Training
The 12th Annual User’s Group Meeting is coming up! This year it will be held on September 12th and 13th in Centennial, Colorado with additional training classes held throughout the week. To sign up for the conference or classes, please email us at info@ciscocems.com. Comment below if there is a specific topic that you would like discussed this year!
RSVP for the User’s Group Meeting
Tuesday, June 28, 2022
Software Training
CiSCO’s 11th Annual User’s Group Meeting has been scheduled! However, this year is going to be different. Instead of one day of presentations from CiSCO experts, we are hosting two days to accommodate outside vendors including a guest speaker from the EPA! Be sure to RSVP and sign up for additional training throughout the week of the conference. We can’t wait to see you!
RSVP for the User’s Group Meeting
Monday, April 21, 2022
Software Training
Friday, April 1, 2022
New FAQ Page
Check out our new FAQ page with answers from our software, analyzer, production, and environmental departments. We will be adding new questions and answers as they arise from these and other departments. Be sure to visit regularly for new additions.
Tuesday, March 1, 2022
COVID-19 Policy Update
Monday, February 28, 2022
Calibration Drift Tests
Tuesday, January 25, 2022
Shelter Frames
Each of our shelters starts off in our welding shop as a basic frame. Here are a few pictures of our welding technicians working on various tasks to create a shelter skeleton.
Tuesday, January 11, 2022
What We’re Working On
Each project in our production warehouse is unique and tailor-made for our customers. Currently we are working on a shelter with custom siding, a shelter with a storage room and a roll-up garage door, a cabinet, an analyzer rack, and a free-standing rack. As your CEMS needs change, send us an email at info@ciscocems.com or give us a call at (303) 790-1000.
Tuesday, December 14, 2021
User’s Group Videos Posted
This year’s User’s Group Meeting was a huge success! Thank you to everyone who joined us in-person and online. We know due to current health regulations and differing company policies that not everyone was able to join us this year. That’s why we posted our presenters’ videos on our company YouTube channel for anyone who missed the conference. Use the link below to find our channel and don’t forget to subscribe!
Tuesday, November 30, 2021
December Software Training
Another CeDAR software training is coming up in December! This training is perfect for new customers, new employees, those who need a refresher, and any plant that is looking to update to a new DAHS software. Email us at info@ciscocems.com to register today!
Monday, August 23, 2021
Final User’s Group Agenda
Friday, June 28, 2021
CeDAR 4 End-of-Life
As a reminder, as of June 30th, 2021, CeDAR 4 and earlier versions of CeDAR will no longer be supported.
What “No longer be supported” means for you:
- We’ll no longer make any modifications to CeDAR logic for screens, reports, alarms, new permits, bugs in the software, etc. for sites running CeDAR 4.
- We’ll no longer offer troubleshooting of issues with CeDAR 4 (communication issues, alarms, exceedances, data editing, data purging, etc.)
- We’ll no longer offer support for CeDAR 4 to CeDAR 4 computer replacements.
- We’ll no longer offer updated versions of breez75x on CeDAR 4 systems. That means any changes to the federal regulations, ECMPS schema, etc. will not be supported for sites running breez75x with CeDAR 4.
- EDR service and EDR assistance will continue to be offered, but would be limited exclusively to the EDR scope of supply. Currently, we plan to continue to offer those services to CeDAR 4 sites for one year after CeDAR 4’s end of life.
Minimum system requirements for CeDAR 7 include:
- Windows 10 Pro- 64-bit
- 16 GB of RAM
- Intel i7 processor
- 512 GB hard drive
CeDAR 7 also requires SQL server 2014 (or higher) standard edition. CeDAR 7 will run on Windows 10 or Windows Server 2016, or Server 2019. CiSCO recommends upgrading Windows 7 machines to Windows 10.
Click here to see the benefits of the latest version of CeDAR, or request a quote.
Friday, June 18, 2021
Annual User's Group
The 10th Annual CiSCO CEMS User’s Group Meeting has been scheduled! This live, in-person event will be held September 14th, 2021, with training continuing throughout the week.
Fully vaccinated people do not need to wear masks. People who have not been vaccinated are encouraged to wear masks. There
are no social distancing requirements for meetings.
Click here for the 2021 User’s Group Meeting Invite. A final schedule of topics has not been set.
Click here to submit an idea for a 2021 User’s Group topic.
Tuesday, June 15, 2021
Software Training
New employees? Need a refresher on running specific reports? Are you ready to take your knowledge of CeDAR to the next level? Sign up for Software Training!
We provide virtual training for both our CeDAR (DAHS) and breez75x (Part 75 Reporting) software. Smaller class sizes are encouraged to promote questions and focused learning. For more information email us at info@ciscocems.com.
Friday, June 11, 2021
Specialized Equipment
Although we specialize in CEMS, they are not the only systems that we can accommodate. This gas chromatograph was contracted to CiSCO by a refinery. It required customized 1/8” tubing which was shaped and installed by our Specialist. Other projects have included mass spectrometers, HPACs, opacity monitors, and flow monitors. For specialized system needs, contact us at info@ciscocems.com.
Friday, June 11, 2021
Online Training Center
Knowledge is power! Expand your employee’s software and CEMS understanding with CiSCO’s Online Training Center. These online training courses are concise and flexible. Managers can track progress, set required courses, and designate compulsory quizzes that issue certificates upon completion. There is even a points system and badges to keep students motivated!
Click here for a full list of online courses or email us at info@ciscocems.com.
Friday, May 28, 2021
Corpus Christi Shelter Shipping
Another successful project being shipped off to its site! This 10x10x9 foot shelter holds a single sample point, full extractive, continuous emissions monitoring system (CEMS).
Wednesday, May 26, 2021
COVID-19 Policy Update
Due to the untimely Coronavirus pandemic, CiSCO has had to make changes to its operating and visitors’ policies. Currently, we are performing most interactions virtually or telephonically. Services that require in-person visits to our location have been minimized to promote safety and limit any possibility of spreading the virus.
With the introduction of multiple vaccines, CiSCO is once again updating COVID-19 policies. All visitors to the building are required to be fully vaccinated, including the two-week period following the final vaccination. Visitors are still required to complete a temperature check and wear masks at all times when inside the building.
Wednesday, June 2, 2021
Software Training
CiSCO is offering Virtual Training on both CeDAR and breez75x from Tuesday, June 22 to Friday, June 25. Please contact MCooper@ciscocems.com for more details or to enroll in the class.
Tuesday, March 23 to Friday, March 26, 2021
Software Training
CiSCO is offering Virtual Training on both CeDAR and breez75x from Tuesday, March 23 to Friday, March 26. Please contact MCooper@ciscocems.com for more details or to enroll in the class.
Monday, July 20, 2020
Annual User's Group - Update
Due to the restrictions on hotels in Colorado and travel restrictions for most of our users we have decided to cancel the 2020 CiSCO CEMS User’s Group Meeting. Based on numerous suggestions from our customers, we will work to expand and restructure this meeting to make the 2021 User’s Group Meeting the biggest and best event yet.
Tuesday, June 2, 2020
Annual User's Group
CiSCO’s 10th annual User’s Group Meeting is Scheduled for 9/15/2020 in Englewood, CO at the Embassy Suites. More details to follow.
Thursday, April 23, 2020
Software Policy Update
Due to the COVID-19 pandemic we are extending the end of life for CeDAR 4 until June 30th, 2021 after which point CeDAR 4 will no longer be supported.
What “No longer be supported” means for you:
- We’ll no longer make any modifications to CeDAR logic for screens, reports, alarms, new permits, bugs in the software, etc. for sites running CeDAR 4.
- We’ll no longer offer troubleshooting of issues with CeDAR 4 (communication issues, alarms, exceedances, data editing, data purging, etc.)
- We’ll no longer offer support for CeDAR 4 to CeDAR 4 computer replacements.
- We’ll no longer offer updated versions of breez75x on CeDAR 4 systems. That means any changes to the federal regulations, ECMPS schema, etc. will not be supported for sites running breez75x with CeDAR 4.
- EDR service and EDR assistance will continue to be offered, but would be limited exclusively to the EDR scope of supply. Currently, we plan to continue to offer those services to CeDAR 4 sites for one year after CeDAR 4’s end of life.
Minimum system requirements for CeDAR 7 include:
- Windows 10 Pro- 64-bit
- 16 GB of RAM
- Intel i7 or Xeon processor
- 512 GB hard drive
CeDAR 7 also requires SQL server 2014 (or higher) standard edition. CeDAR 7 will run on Windows 10 or Windows Server 2012, Server 2016, or Server 2019. CeDAR 7 will also run on Windows 7, however Microsoft no longer supports Windows 7. CiSCO recommends upgrading Windows 7 machines to Windows 10.
Click here to see the benefits of the latest version of CeDAR, or request a quote.
December 17 and 18, 2019
Complete CEM System Training
We held our first Complete CEM System Training in our new training shelter at CiSCO! Click here for more information on hardware training. Click here to see all training offered by CiSCO.
Tuesday, September 10, 2019
Annual User's Group
Three important announcements happened at our 2019 User’s Group.
- The end of life for SLC PLC’s.
- Then end of life for CeDAR 4 – due to rapid changes in technology, CiSCO has decided as of January 2021 to no longer support version 4 and older versions of CeDAR. Over 50% of our clients are currently using newer versions. Click here to see the benefits of the latest version of CeDAR or request a quote.
- The announcement of CiSCO’s new CEMS Training Center. Click here for more information on the CiSCO CEMS Training Center.
Tuesday, September 10, 2019
Annual User's Group
CiSCO hosted the 9th Annual CEMS User’s Group on Tuesday, September 10, 2019 in Centennial, Colorado and was well attended with 45 participants.
Several CiSCO employees from various departments gave presentations on a variety of topics including:
- An update on Thermo, Teledyne & CAI analyzers
- What to know and consider when replacing heated sample lines
- A panel discussion of regulatory updates
- And an update for what’s new and what’s coming in CeDAR 7 software
The CEMS User’s Group is an opportunity for:
- Sharing of ideas between each other and with CiSCO personnel
- Learning about what is happening at CiSCO
- CiSCO will be listening to all of you about what you want to see in the coming months and years to make our products and services better
- Putting a face to a name (both for us and for you)
- Getting your questions answered
Thanks to everyone for making this years User’s Group a success. We hope to see you in 2022 at our 11th Annual User’s Group!
Click here to see the complete 2022 agenda or agendas from previous years.
Click here to see materials presented in 2022 or previous years.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
